• start
  • proteus
  • utstyr
  • bøker
  • skolesider
  • kontakt oss

  • Proteus VSM for dsPIC33

    Proteus VSM for dsPIC33 contains everything you need to develop, test and virtually prototype your embedded system designs based around the Microchip Technologies™ dsPIC33 series of microcontrollers. The unique nature of schematic based microcontroller simulation with Proteus facilitates rapid, flexible and parallel development of both the system hardware and the system firmware. This design synergy allows engineers to evolve their projects more quickly, empowering them with the flexibility to make hardware or firmware changes at will and reducing the time to market.

    Purchasing Options

    Each purchase of the Proteus VSM products includes a professional copy of the ISIS schematic capture package, the VSM simulation engine with industrial grade virtual instrumentation and literally thousands of embedded peripheral models (Nytt vindu). The system can be further upgraded by adding graph based simulation and PCB layout modules.

    If you wish to add PCB Layout or other processor families to your purchase please visit the commercial price list or contact us to further discuss requirements.

    Technical Information

    PIC 33 Variants

    • dsPIC33FJ12GP201, dsPIC33FJ12GP202, dsPIC33FJ32GP202
    • dsPIC33FJ32GP204, dsPIC33FJ16GP304, dsPIC33FJ12MC201
    • dsPIC33FJ12MC202, dsPIC33FJ32MC202, dsPIC33FJ32MC204
    • dsPIC33FJ16MC304

    Model Features

    • Supports simulation of the entire instruction set.
    • Supports all port and other I/O pin operations.
    • Supports all timers including watchdog timer, sleep mode and wake-up from sleep.
    • Supports both Capture-Compare and PWM modules in all modes.
    • Supports Parallel Master Port (PMP) module including legacy PSP modes.
    • Supports all serial communication peripherals including SPI, I2C and UART.
    • Supports Analogue-to-Digital Conversion (ADC) module including support for voltage reference pins.
    • Supports Analogue Comparator modules including support for internal and external voltage references.
    • Supports Real Time Clock including automatic initialisation from the PC time.
    • Supports all interrupt modes including interrupt priorities.
    • Support for extended instruction set for appropriate variants.
    • Provides internal consistency checks on code (e.g. execution of invalid op-codes, illegal memory accesses, stack overflow checking, etc.).
    • more... Fully integrated in to the VSM source level debugging system.
    • more... Fully integrated into the Proteus Diagnostic Control System.

    Model Limitations

    • The FOSCEL, FOSCEL, CLKDIV and OSCTUN bits/registers are not supported.
    • Loop back and irDA modes are not currently supported.
    • The SPI modules do not currently support either "enhanced" mode (FIFO buffering) or "framing" modes (essentially, any feature enabled via SPIxCON2).
    • The register PMDx effects are not modelled.
    • Brown out detection is not currently modelled.
    • Quadrature encode interface - bit QEI1CON Stop in Idle mode not modelled.
    • Motor Control PWM - bit PxTCON, PWM Time Base Stop in Idle Mode not modelled.
    • ADC with SS&H - only the variant up to 13 analog input pin and without DMA is supported at moment.

     

    Compiler support

    Proteus VSM models will fundamentally work with the exact same HEX file as you would program the physical device with. However, far more debugging information is available when using a compiler to write the firmware and providing these object files to Proteus in place of the HEX file provides a much richer working environment. More information on supported compilers can be found here.


    The Microchip name, logo, PIC, and MPLAB are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.